![]() In these 1/8th scale racing setups, the Mamba X should be run at 4S Lipo (16.8V) max and is recommended to be paired with the Castle 1512-1800Kv (P/N: 060-0062-00) or Castle 1515-2200Kv (P/N: 060-0063-00) motor, with appropriate gearing only. *In 1/8th scale setups, the Mamba X is intended to be used for off-road racing in buggies weighing up to 9 lbs (including batteries and ready-to-run). Audible Alerts and LED Alerts for easy diagnoses of common issues.Auxiliary Wire Functionality for "on-the-fly" adjustments.Pair with a Castle 4-POLE 12-SLOT SENSORED MOTOR to provide precise throttle control and buttery smooth starts! Whether you are racing at the track with your 2wd buggy, bashing through mud puddles in your SCT or monster truck, or navigating a hardcore crawling excursion, this controller raises the bar to a whole new level. The Mamba X is extremely versatile, capable of powering a wide variety of applications ranging from 2S to 6S and vehicles ranging from 1/10th scale to 1/8th scale*. These are the pillars of the Mamba X design and the driving forces behind the feature-packed controller. We at Castle wanted to address three main concepts while designing a new ESC for the modern day RC enthusiast VERSATILITY, RELIABILITY, and PERFORMANCE. This feature can be added to any of the other AUX wire modes by checking the Idle Erase box in Castle Link.Castle Creations is proud to announce our new flagship surface product, the MAMBA X EXTREME 1:10 SCALE WATERPROOF ESC. The motor will emit a long beep to indicate the log was erased. Please visit for more detailed setup information.ĭatalog Erase Enable: When the vehicle is stopped, toggling the AUX signal for a few seconds will erase the datalog. “Race Mode” is optimized for either Racing/Bashing and “Crawler Mode” is optimized for crawling. Note: Motor test must be performed before using this setting.Įnable Rock Race/Crawler Mode: This mode allows the user to switch between two different modes on the fly: “Race Mode” and “Crawler Mode”. Great for finding the perfect torque control setting for your track and tires. Torque control is disabled when the input exceeds 1.9ms. Torque Control Adjustment: The ESC’s torque control setting is scaled from 0.1 to 5.0 depending on the signal received on the AUX wire. When the controller receives an AUX wire signal below 50% (<1.5ms) or if the AUX wire is disconnected, reverse capability is enabled. Pairing the sensor ready MAMBA MONSTER X 8S with the Castle 2028-800KV sensored motor enables users with heavy, high speed rigs to experience controllable low-end ranges, without sacrificing power, punch, or speed. Reverse Enable/Disable (Only works in modes with reverse): Reversing is disabled when the controller receives an AUX wire signal above 50% (>1.5ms). Max Brake Adjustment: The ESC’s maximum braking power is scaled from 10% to 100% depending on the signal received on the AUX wire.ĭrag Brake Adjustment: The ESC’s drag brake setting is scaled from 0% to full brake depending on the signal received on the AUX wire. ![]() ![]() Perfect for passing the controls to children, neighbors, or your boss. Max Throttle Adjustment: The ESC’s maximum power is scaled from 10% to 100% depending on the signal received on the AUX wire. If the AUX wire becomes disconnected from the receiver, the ESC will use the value selected in Castle Link instead. The AUX signal has fixed endpoints of 1.1ms and 1.9ms, so there's no need to calibrate anything to use the AUX wire. Castle Creations Mamba Monster X 8S 1/6 Brushless ESC CSE010-0165-00 Cars & Trucks - AMain HobbiesProTek RC 370TBL 'Black Label' Waterproof High Torque B. Enable this feature with Castle Link to dynamically reign in your vehicle's power, enabling reversing, and more. Your ESC can be connected to an additional radio channel using the AUX wire (white signal wire) to adjust driving parameters on-the-fly.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |